Class1 118712 - TPG+ Governor - 118710 Manuel d'utilisateur télécharger pdf

Total Pressure Governor Plus (TPG+)

OEM Quick Manual

TPG+ OEM Quick Manual P/N 118712

REV –

01-20-2009

INSTALLATION

Mount the TPG+ on the operator’s panel with four #10 screws.

The dimensions in the detail below are in inches [millimeters].

DISCHARGE PRESSURE TRANSDUCER INSTALLATION

Install the 300 psi (2068 kPa, 20 bar) discharge pressure

transducer (p/n 113557) on the discharge side of the pump.

The pressure connection is a ¼-18 NPT male port. A ‘T’ fitting

can be used to share the pressure gauge outlet on the

discharge manifold.

INTAKE PRESSURE TRANSDUCER INSTALLATION

Install the 300 psi (2068 kPa, 20 bar) intake pressure

transducer (p/n 113557) on the intake side of the pump. The

pressure connection is a ¼-18 NPT male port.

VERIFY ENGINE RPM

Verify proper J1939 CAN connection to the engine’s ECM by

monitoring the RPM display of the TPG+ while the engine is

running. The display should show accurate RPM information.

WIRING HARNESS

The main system harness (p/n 118453) is comprised of a pair of harnesses:

the power/communication harness (depicted below in blue) and the signals

harness (depicted below in green).

For the analog control option, add harness wires (p/n 118454) depicted in

red.

VERIFY INTERLOCKS

The TPG+ requires OEM provided interlocks THROTTLE READY and PUMP ENGAGED for proper operation. The TPG+ utilizes backlit text to

indicate interlock status. The interlock status indicators are located directly beneath the switch panel.

Activate the throttle ready interlock. (Apply system power to pin 2 of connector C4).

Verify the THROTTLE READY text illuminates.

► The TPG+ will operate in RPM mode only and cannot be changed to pressure mode.

Activate the pump engaged interlock. (Apply system power to pin 10 of connector C4).

Verify the PUMP ENGAGED text illuminates.

► The TPG+ will not operate in any mode without the THROTTLE READY interlock.

Activate the throttle ready and pump engaged interlocks. (Apply system power to pins 2

and 10 of connector C4).

Verify the PUMP ENGAGED, OKAY TO PUMP, and THROTTLE READY text

illuminates.

► The TPG+ will operate in either mode.

1 2

OEM Quick Manual 1

Résumé du contenu

Page 1 - OEM Quick Manual

Total Pressure Governor Plus (TPG+) OEM Quick Manual TPG+ OEM Quick Manual P/N 118712 REV – 01-20-2009 INSTALLATION Mount the TPG+ on the operator’s

Page 2

ZERO CALIBRATE THE DISCHARGE PRESSURE TRANSDUCER The pressure indicated by the TPG+ may not show ‘0’ when the pump discharge pressure is actually zero

Commentaires sur ces manuels

Pas de commentaire

Class1 118712 - TPG+ Governor - 118710 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Class1 118712 - TPG+ Governor - 118710. Class1 118712 - TPG+ Governor - 118710 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Class1 118712 - TPG+ Governor - 118710