Class1 Intelli Tank 4 light driver module Manuel d'utilisateur télécharger pdf (Page 3)

Intelli-Tank Manual (106759) 12-15-03 – 3 – Class 1

When the unit is first powered up the lights will cycle on individually starting with

the EMPTY (output 1) light and then the lights will show the current status.

• A Module connected to a Master unit (through the 1-wire data line) will mimic

the Master unit’s LED condition and flash rate.

• A Module not connected to a Master unit will alternately flash the upper two

lights and the lower two lights. This indicates a “no data” condition.

Level indications:

LEVEL output 4 output 3 output 2 output 1

7/8 < LVL <= F ON ON ON ON

3/4 < LVL <= 7/8 FLASH .8Hz ON ON ON

5/8 < LVL <= 3/4 ON ON ON

1/2 < LVL <= 5/8 FLASH .8Hz ON ON

3/8 < LVL <= 1/2 ON ON

1/4 < LVL <= 3/8 FLASH .8Hz ON

1/8 < LVL <= 1/4 ON

1/16 < LVL <= 1/8 FLASH .8Hz

E <= LVL <= 1/16 FLASH 1.6Hz FLASH 1.6Hz FLASH 1.6Hz FLASH 1.6Hz

Auto-Fill Function

Auto-fill mode is active when the auto-fill select input (pin 8) is grounded. The

auto-fill status light output (pin 2) indicates the current status of this mode and is

capable of driving positive voltage to 250mA.

Status Light Condition

Auto-fill mode selected and is in standby

Flashing

Auto-fill mode selected and is currently filling

(refill output is active).

Off

Auto-fill mode de-selected or error condition is

present.

1 2 3 4 5 6 7 8 9

Pas de commentaire

Class1 Intelli Tank 4 light driver module Manuel d'utilisateur Page 3