Class1 Intelli Tank level display with drip empty Manuel d'utilisateur télécharger pdf (Page 2)

Intelli-Tank Manual (106759)092204 – 2 – Class 1

The Intelli-Tank 4 light tank level is designed to display a liquid’s volume to an eighth

of a tank level accuracy through 180-degree viewable ultra-bright LEDs. The unit set

as a Master uses a 0 – 5 PSI pressure transducer to obtain tank level information

and then relays that information along the data line to units set as Remotes. Multiple

Remote units can be linked to the Master tank level unit.

Tank Level Gauge C1 – PN 106299 – 12V

106296 – 24V

Pressure Transducer C1 – PN 102162

Installation Harness C1 – PN 106690 – Master

106691 – Remote

User Manual C1 – PN 106759

Modes of Operation:

Master When the unit is calibrated with a proper pressure signal it

automatically becomes a Master Unit and will send tank level

information along the 1-wire data transfer line to all other Remote units

on the line.

Remote Units are initially shipped as Remote units. A Remote unit only

requires power, ground and the 1-wire data transfer line. The Remote

unit mimics the Master unit’s display by reading the appropriate

information on the 1-wire data transfer line.

Self Test When the self test password is entered the unit will perform a self test

and display the results on the display. A Master unit will command all

Remote units to perform the self test also.

Note: All units are shipped as Remote units. A valid calibration will set the unit

as a Master. A Master can be reset as a Remote by entering a password.

1 2 3 4 5 6 7 ... 15 16

Pas de commentaire

Class1 Intelli Tank level display with drip empty Manuel d'utilisateur Page 2